Stamping and Forming Mechanic / Setter for Automatic Stamping and Bending Machines (m/f/d)
Stamping and Forming Mechanic / Setter (m/f/d)
You understand how machine, tool and process work together. You set up our complex automatic stamping and bending machines, carry out initial sampling and reliably bring new or modified tools into stable series production.
- Type
- Permanent position
- Location
- Marktrodach
- Hours
- Full-time
- Department
- Stamping and bending technology · Full-time
The position
Machine. Tool. Process.
Your main focus is independently setting up our Bihler automatic stamping and bending machines as well as further equipment from Lafranconi and SCHAAL. Setting up involves not only the tool itself but also material feeds, bending and auxiliary units, and thread-forming or thread-cutting units. After setup, you start up the machine and inspect the first parts against the drawing and inspection plan. If dimensions or functions are not yet right, you analyse the cause systematically: is an adjustment to the machine or process parameters enough, or does a punch, a bend or another tool component need to be modified? You describe and discuss any necessary tool modifications directly with our in-house toolmaking department. After the modification, you put the tool back into operation and check the result. You are then responsible for a stable series process that meets the quality requirements.
- 01Independently set up and adjust complex automatic stamping and bending machines and presses
- 02Install, align and adjust tools, material feeds, bending units and auxiliary units
- 03Set machine and process parameters and start up equipment in a controlled manner
- 04Support initial sampling and production approvals based on drawings and inspection plans
- 05Analyse dimensional and quality deviations and distinguish between process-related and tool-related causes
- 06Agree necessary tool corrections with our in-house toolmaking department and then verify them
- 07Monitor, stabilise and continuously optimise ongoing series processes
- 08Rectify faults and carry out minor maintenance, servicing and repair work
- 09Document setup, process and inspection results in a traceable way
What you bring
Experience. Process understanding. Personal responsibility.
Ideally, you have completed an apprenticeship as a stamping and forming mechanic. Toolmakers, industrial mechanics or skilled workers from a comparable metalworking trade who have experience in setting up complex production equipment are equally welcome. Experienced setters from other technical production areas can also learn stamping and bending technology with us. What matters is that you do not just operate a machine but understand tool, process and quality as one interconnected system.
- 01Completed technical vocational training, preferably as a stamping and forming mechanic, toolmaker or industrial mechanic
- 02Experience in setting up stamping, bending or comparable production equipment
- 03Experience with Bihler or Lafranconi machines is an advantage but not a requirement
- 04Good understanding of tools, mechanics and automated production processes
- 05Confident handling of technical drawings, inspection plans and measuring equipment
- 06Ability to analyse dimensional deviations and faults systematically
- 07A careful, reliable and self-directed way of working
- 08Strong quality awareness
- 09Team spirit and willingness to work closely with toolmaking and quality assurance
What we offer you
Good work needs good conditions.
You work independently on technically demanding equipment and receive thorough training in our specific stamping and bending technology. Toolmaking, quality assurance and management are all on site, so decisions and technical coordination happen without long detours.
- 01Permanent employment in a sound family business
- 02Thorough induction into our Bihler, Lafranconi and press technology
- 03Regular working hours from 7:00 to 15:30
- 04Willingness to work two shifts during peak periods is part of the contract, although in practice this has not been necessary for many years
- 05No weekend work in regular operation
- 06Varied work on demanding tools and equipment
- 07Plenty of personal responsibility in an experienced team of setters
- 08In-house toolmaking and short technical coordination channels
- 09Direct line to the management
- 10Holiday pay
- 11Christmas bonus linked to performance and company results
- 12Monthly fuel voucher
- 13Free water: chilled, sparkling or hot
In five steps
Five steps to us.
The first contact only takes a few minutes. You can add documents directly in the career check.
- 01
Complete the online application
- 02
Personal response from our HR department
- 03
Introductory interview with the department and HR
- 04
Get to know the team and the workplace on site
- 05
Decision and contract
Application · about 3 minutes
A few questions. Direct contact.
Multiple-choice questions move on automatically. Documents are helpful but not essential for the first contact.
Type
17 %
- 01Type
- 02Position
- 03Experience
- 04Start
- 05Documents
- 06Contact
Step 1 of 6
What is the application for?
Please choose; you will then move on automatically.
No suitable option? Apply speculatively
Questions about your application
Simply personal.
Julia Berisha
HR & Marketing